suspension

LIFT KITS

LEVELING KITS

LOWERING KITS

SHOCK ABSORBERS

Roadmaster Active Suspension

The only rear leaf spring suspension upgrade that converts basic “passive” leaf spring suspension to mechanical “active” suspension

System absorbs and dissipates load force energy, resulting in significantly reduced or eliminated rear squat caused by heavy loads

Improves vehicle stability, balance, traction and control, all with (or without) a load

LIFT KITS

Rough Country Lift Kits 

Makes Available – Chevy, Ram/Dodge, Ford, GMC, Jeep, Nissan, Toyota, Hummer, International, Suburu.

Lift Kit Sizes – 0.5-inch, 1-inch, 1.5-inch, 2-inch, 2.5-inch, 3-inch, 3.5-inch, 6-inch

*See Store For Installation Availability and Details

ReadyLIFT SST Lift Kits 

Makes Available – Chevy, Ram/Dodge, Ford, GMC, Jeep, Nissan, Toyota, Hummer, Suburu, Cadillac, Honda, Hyundai, Infiniti, Suzuki, Kia, Lincoln.

Smart Suspension Technology (SST) Lift Kits and are designed to provide a lifted, but level or near level stance along with clearance for maximum wheel/tire sizes, all while maintaining your factory ride.

*See Store For Installation Availability and Details

ReadyLIFT Big Lift Kits 

Makes Available – Chevy, Ram/Dodge, Ford, GMC, Jeep, Nissan, Toyota, Hummer, Suburu, Cadillac, Honda, Hyundai, Infiniti, Suzuki, Kia, Lincoln.

ReadyLIFT’s big lift kits provide maximum lift while maintaining factory handling. If you want a really large lift on your truck, suspension lift kits deliver, allowing you to achieve up to 6, 7, 8, or 9 inches of lift. These kits are also excellent if you want to really build a customized truck because they allow you to virtually install any tire and wheel size.

*See Store For Installation Availability and Details

ReadyLIFT Rear Lift Kits 

Makes Available – Chevy, Ram/Dodge, Ford, GMC, Jeep, Nissan, Toyota, Hummer, Suburu, Cadillac, Honda, Hyundai, Infiniti, Suzuki, Kia, Lincoln.

Rake is the height difference when comparing the front to the rear; essentially the front sits lower than the rear. Manufacturers do this to allow trucks not to sag too much when hauling loads. Unfortunately, this rake doesn’t always bypass the issue. Some drivers add so much weight the truck begins to sag too much even with the rake. This is where the rear block comes in. A rear block lifts the rear of the truck enough to allow a level drive while hauling heavy loads.

*See Store For Installation Availability and Details

SuperLift Lift Kits 

Makes Available – Chevy, Ram/Dodge, Ford, GMC, Jeep, Toyota

Lift Kit Sizes – 1.5-inch, 2-inch, 2.5-inch, 3-inch, 3.5-inch, 4-inch, 4.5-inch, 5-inch, 5.5-inch, 6-inch, 6.5-inch, 7-inch, 8-inch, 12-inch

For Superlift it’s not just about setting the standard with high-performance lift kits, it’s about perfecting the art of reliability with specialized products. Built for Enthusiasts by Enthusiasts. 

*See Store For Installation Availability and Details

Carli Lift Kits 

Makes Available – Dodge, Ford, Jeep

When Sage Carli started Carli Suspension, he embarked upon a mission to bring the highest quality performance suspension systems to the market. In order for Sage to attain this goal he surrounded himself with all the right people which consisted of experts of their fields such as King Shock Technology, Deaver Springs, and Bilstein Shocks. By letting the experts of these fields do what they do best, each and every Carli Suspension system exceeds the expectations of even the most stringent consumer. 

*See Store For Installation Availability and Details

Rancho Lift Kits 

Makes Available – Chevy, Ram/Dodge, Ford, GMC, Jeep, Toyota

Lift Kit Sizes – 1.75-inch, 2-inch, 2.25-inch, 2.5-inch, 3-inch, 3.5-inch, 4-inch, 4.5-inch, 5-inch, 5.5-inch, 6-inch

Rancho suspension systems, shock absorbers, accessories and other related products deliver rugged performance for work and play in any on – or off-road environment.

*See Store For Installation Availability and Details

MaxTrac Lift Kits 

Makes Available – Cadillac, Chevy, Ram/Dodge, Ford, GMC, Jeep, Nissan, Toyota

Lift Kit Sizes – From 1″ to 7.5″

MaxTrac lift kits guarantee spectacular on and off-road performance at an amazing value. MaxTrac lift kits are available for all of the popular truck models including Chevy Silverado, GMC Sierra, Dodge RAM 1500 2500 3500, Ford F150, Nissan, Toyota, and new MaxTrac lift kits are being added every day!

*See Store For Installation Availability and Details

Pro Comp Lift Kits 

Lift Kit Styles – Stage I, Stage II, Stage III and Long Arm Kits.

Driven by genuine off-road enthusiasts, Pro Comp suspension products reflect customer driven, racing influenced, technology and engineering with a focus on world-class manufacturing processes and techniques. When it comes to your vehicle’s handling, look and performance, we know you don’t make compromises and neither do we. From the middle of downtown to the middle of nowhere, Pro Comp will get you there and back.

*See Store For Installation Availability and Details

LEVELING KITS

Rough Country Leveling Kits

Makes Available – Chevy, Ford, Dodge, GMC, Nissan, Toyota.

Levels the front with the rear of the truck

Offers perfect front lift height for older trucks with rear spring sag

Works with all engine models

Works with dually models

*See Store For Installation Availability and Details

ReadyLIFT Leveling Kits

Makes Available – Chevy, Ram/Dodge, Ford, GMC, Jeep, Nissan, Toyota, Hummer, Suburu, Cadillac, Honda, Hyundai, Infiniti, Suzuki, Kia, Lincoln.

Most trucks, SUVs, and Jeeps come from the manufacturer with a slight rake. Rake is when the front end of the vehicle is lower than the rear. Manufacturers release their vehicle with a rake to level out once weight is added to the rear of the truck. When adding weight, the rear suspension will compress and level out with the front or slightly lower to optimize towing.

*See Store For Installation Availability and Details

SuperLift Leveling Kits

Makes Available – Chevy, Ram/Dodge, Ford, GMC, Jeep, Toyota

For Superlift it’s not just about setting the standard with high-performance lift kits, it’s about perfecting the art of reliability with specialized products. Built for Enthusiasts by Enthusiasts. 

*See Store For Installation Availability and Details

MaxTrac Leveling Kits

Makes Available – Chevy, Ram/Dodge, Ford, GMC, Jeep, Toyota, Cadillac, Nissan.

MaxTrac provides the most complete line of high-quality leveling kits for all trucks and SUV’s.  Whether it is a torsion key, strut spacer, or coil spacer, Max Trac uses the highest-grade material while keeping the price competitive.  By far, this is the most cost-effective way to lift vehicles for larger wheels and tires, and improve the leveled stance, all while maintaining factory like ride quality and handling.

*See Store For Installation Availability and Details

Carli Leveling Kits

Makes Available – Dodge Ram

Carli Suspension products are created to meet the expectations of the daily street driver to the most extreme avid off road enthusiast. From the urban street jungles to the desolate dusty roads of Baja, Carli Suspension products will exceed all expectations.

*See Store For Installation Availability and Details

Rancho Leveling Kits

Makes Available – Dodge/Ram, Ford, Chevy, GMC, Jeep, Nissan, Toyota.

Rancho suspension systems, shock absorbers, accessories and other related products deliver rugged performance for work and play in any on – or off-road environment.

*See Store For Installation Availability and Details

Pro Comp Leveling Kits

Pro Comp is the fastest, safest, least expensive way to bring the front of your Vehicle level with the rear. This gives you the clearance and ability to add wheels and tires up to 35 inch in dia. Pro Comp products do not affect the factory OEM ride quality or comfort. Thats why Pro Comp also offers a lifetime warranty for as long as you own your vehicle against defects for all of our products.

*See Store For Installation Availability and Details

LOWERING KITS

Rough Country Lowering Kits

Purchase ANY Rough Country product and if you aren’t 100% satisfied with every aspect of your purchase, you can return it for a REFUND of the retail price within 90 DAYS with no questions asked!

MaxTrac Lowering Kits

From classic S-10, C-10, and 1500 trucks to late model trucks and SUV’s, Max Trac has a wide range of components to provide moderate to extreme lowering options.  Max Trac also utilizes the same spindle technology on its late model lowering systems for 2WD and 4WD applications.  The combination of lowering spindles and adjustable struts not only provide the optimum lowering stance, but each kit is designed vehicle specific to achieve the factory like ride quality.  The smooth ride, quick bolt-on installation, and high-quality parts are what make Max Trac kits stand out from the rest!

Ground Force Lowering Kits

For nearly three decades, Ground Force Suspension Systems has been a leading manufacturer in tuned performance suspension systems for your 2WD/4WD light-truck, SUV, crossover, and performance muscle cars! All Ground Force suspension systems and components have been subjected to rigorous in-house and track testing, giving your vehicle the optimal ride, drive set-up and safety you demand! Our engineers work side by side the OE automotive manufacturers, adding in suspension development on many performance vehicles offered today right from your dealerships, and on the track.

Belltech Lowering Kits

The entire team at Belltech strives for an exceptional experience for every single one of our valued consumers and customers. For over 35 years, Belltech has been the premier manufacturer of the greatest suspension systems in the world and places the highest priority on delivering the highest-quality product for you to fit right the first time, be long lasting and make you smile. If your experience did not meet that exceptional experience, rest assured we stand behind our products, and will do everything in our power to make it right. Below is our warranty policy on all Belltech products laid out there to make sure you know what to expect when you purchase your Belltech products.

SHOCK ABSORBERS

Fox Performance Series

Increase your vehicle’s off-road capability by extending drop-out travel in most applications. Experience on-road comfort with performance-minded shock valving for a connected ride with less vehicle sway. Tuned specifically for your vehicle’s application.

Built-to-last, torture-tested and race-proven to give a lifetime of great rides. FOX products are built from aluminum, dissipating heat four times better than conventional materials. All FOX shocks are fully serviceable and resistant to corrosion and harsh environments.

Fox Performance Elite Series

Expand your vehicle’s capability with an oversized performance shock that increases strength, provides control and extended wheel travel specifically engineered for your vehicle. The larger aluminum body dissipates heat more efficiently and the increased internal oil volume allows for more control through FOX’s race-developed high-flow pistons.

Confidence comes with control. FOX Performance Elite shocks offer the widest range of adjustability we offer. Easily adjust your shock for terrain, load and speed to stay in control and confident no matter what path you take.

Bilstein B8 TerraSport

Bilstein B8 TerraSport direct fit shocks are designed to increase ground clearance and improve off-road capability for CUVs. Enthusiasts will gain 1-2” of lift depending on application, allowing them to safely navigate back-country terrain, while enhancing day-to-day ride quality. Like all Bilstein products, B8 TerraSport shocks have been tested and tuned for each application, and always with the end user in mind. Whether you’re traversing your way up a snow packed summit, or loaded up with gear and looking for that epic camping spot, B8 TerraSport gives you the confidence to push further when the pavement ends, and the durability to get you back home.

Bilstein B8 8100 (Smooth Body)

BILSTEIN B8 8100 reservoir shock absorbers are a direct fit solution for lifted trucks and SUVs. Constructed from aerospace quality billet components, the large 60mm ID shock body, paired with a unique remote or piggyback reservoir, offers a higher oil volume capacity to control heat while tackling rough road surfaces over long distances. Whether rugged trails or asphalt roads, the 8100’s monotube design and 60mm piston with digressive valving offers consistent comfort and control so you can tame the terrain in style.

Bilstein B8 8100 (Bypass)

BILSTEIN B8 8100 (Bypass) is a direct fit, position sensitive damper specifically designed for light trucks and SUVs. Bypass shock absorbers offer the most compliant ride in all conditions and provide maximum bottom out control when the road gets rough. Utilizing an adjustable external bypass shock is the easiest and most effective way to tune your suspension for ultimate performance.

Bilstein B8 5160

With an added remote reservoir, BILSTEIN B8 5160 shock absorbers provide ultimate vehicle control on even the harshest terrains. Zinc plating and increased oil capacity dissipate heat more effectively assuring long-term durability.

Bilstein B8 5165

Designed for modified or specialty vehicles, BILSTEIN B8 5165 shock absorbers combine superior suspension technology with custom lengths and valvings. With an added remote reservoir, BILSTEIN B8 5165 shock absorbers provide ultimate vehicle control on even the harshest terrains. Zinc plating and increased oil capacity dissipate heat more effectively assuring long-term durability.

Bilstein B8 5125

With years of experience and time-tested design, the BILSTEIN B8 5125 custom fit shock absorbers combine the perfect amount of off road dependability with smooth, onroad driving and affordability. The 5125 is sold by length and offers unique valving profiles to accomodate any terrain.

Bilstein B8 5100 (Ride Height Adjustable)

Designed to level the front of mid-size to half-ton trucks and SUVs, BILSTEIN B8 5100 (Ride Height Adjustable) shock absorbers are the perfect alternative to coil spring spacers. Levels and lifts vehicle 0-2.8″, depending on application.

Bilstein B8 4600

We know that you depend on your vehicle for many aspects in life, and we build a product that you can count on. When it comes to performance and dependability, you can trust that BILSTEIN builds to the highest of quality and safety standards – and we back our products with a warranty to prove it.

Pro Comp PRO-X Shock Absorbers

The Pro Comp PRO-X Twin Tube Shocks offer good damping performance and are intended for vehicles that see a lot of paved roads with the occasional off-road adventure. They feature a high-quality general-purpose twin tube design and are offered in extended lengths to accommodate lifted trucks. With 10 stage velocity sensitive valving, the shock accomodates various road conditions while improving your vehicles handling characteristics. The large 5/8 inch chrome hardened piston rod and unique Teflon rebound stop delivers a comfortable highway ride and the ability to handle the most demanding driving conditions.

Pro Comp PRO-M Monotube Shock Absorbers 

Take the next step-up in off-road performance with Pro Comp PRO-M Monotube Shocks. These Shocks deliver fast reaction and performance with consistent ride quality whether you’re on an off-road adventure in tough terrain or on the road home back to the city. Featuring an internal floating piston to separate oil from the nitrogen gas charge to eliminate performance robbing cavitation and multi-stage valving to optimize the ride and handling characteristics for each application. The 2.0 shock body provides increased oil capacity to improve heat dissipation during off-road use and the all-new wiper seal design ensure your shocks will never leak. Pro Comp PRO-M shocks are built for having fun off-road and delivering a smooth ride on-road.

Pro Comp 2.5 PRO-VST Shock Absorbers 

For the most challenging terrain the all-new 2.5 PRO-VST SERIES shocks are the PRO’s choice. These new shocks are built to endure off-road carnage while providing lasting damping performance. Designed for maximum off-road capability, the 2.5 PRO-VST Monotube Shocks & Coilovers are constructed with a hard-anodized thick wall impact forged body. The robust 2.5″ shock body on the PRO-VST allows for maximum damping capacity. The hard-anodizing reduces friction and bore wear inside the shock-body. Featuring 17-4 PH stainless steel precipitation hardened shafts that are chrome plated for maximum corrosion and abrasion resistance. With Vehicle Specific Tuning (VST), Pro Comp PRO-VST shocks are specifically tuned for maximum ride quality on-road and pro performance off-road!”

Rancho RS5000

Rancho® RS5000™ shocks have been the shock of choice all over the globe since 1985. These iconic shocks were the first to deliver application-specific valving and are tuned to each unique vehicle model. Ideal for work or play, Rancho RS5000 shocks deliver a comfortable highway ride while being responsive during off-road driving on any stock or lifted application. The world’s most proven performance shocks! Covered by a Limited Lifetime Warranty.

Rancho RS5000X

The core of this new and innovative shock from Rancho® is the unique rebound valving system and an advanced compression phase of the shock absorber. This proprietary process developed by the ride engineers at Rancho will elevate the overall handling and performance of your vehicle on and off-road.

Rancho RS7MT Monotube

From the pavement to the trail, the new Rancho® RS7MT™ monotube shocks are made for adventure. A complete performance upgrade for your Jeep, truck or SUV’s suspension system, Bring It with RS7MT shocks. Engineered to help you handle anything that comes your way, the RS7MT shocks are application-tuned for precision on-road and off-road handling.

Rancho RS9000XL 

The Rancho® RS9000™XL 9-position adjustable series delivers nine levels of performance to on- and off-road trucks, SUVs and Jeeps. Globally recognized as the first 9-position manually adjustable ride control series in the off-road market, the advanced RS9000XL series is ideal for on- and off-road use, towing and more. The adjustable damping enhances ride characteristics by counteracting the additional unsprung mass inherent in larger tire and wheel combinations. Engineered and manufactured in the U.S., all RS9000XL series units are covered by a Limited Lifetime Warranty.